=================================================================
 Readme for Update of NeuroCheck Serial Port driver
=================================================================
          ===/\ NeuroCheck 6.0 Service Pack 4 /\===


This readme describes the required steps to update the serial port
driver in an existing NeuroCheck 6.0 installation.

For a new installation please refer to help file page installation.

=================================================================

Please proceed as follows:

1. Log on to your PC in a user profile with administrator rights.

2. Make sure that NeuroCheck is closed.
   
3. Copy all the files from the folder NcDriver of the ZIP-file 
   into the NeuroCheck program folder (replace existing files):
   C:\Program Files\NeuroCheck 6.0.

4. Copy the file from the folder HelpFile of the ZIP-file into
   the sub folder Documentation\Help of the NeuroCheck program 
   folder (replace existing files).
     
5. Execute InstallationFinalizer.exe in the sub directory
   Tools\InstallationFinalizer\ of your NeuroCheck program folder.


# for further questions, please send an email to support@neurocheck.com

==============================================================
      Copyright (C) 2011 NeuroCheck GmbH, Germany      
==============================================================
Email: support@neurocheck.com
Web:   www.neurocheck.com
===============================================


